Espresso part size chart
51mm, 54mm and 58mm are group head designations, not the size of any single part. This chart lists what each part actually measures, taken with a caliper on the parts we stock.
"54mm" Breville
Group head is 54 mm. Basket inner diameter is about 53.3 mm, so 53 mm tampers and puck screens fit.
"51mm" De'Longhi
Basket ID is 51 mm. There are two different gaskets behind the label: 58 mm OD and 73 mm OD.
"58mm" E61
The screen is 58 mm across; the gasket is 57 mm ID and 73 mm OD. Two different numbers for the same group head.
Group head gaskets
Gaskets are specified by outer diameter. Two machines can both accept a "51mm" portafilter and still need completely different seals.
| Group head | Outer Ø | Inner Ø | Thickness | Machines |
|---|---|---|---|---|
| Breville / Sage "54mm" | 65 mm | 48 mm | 8.5 mm | Barista Express BES870 / 875 / 876 · Barista Pro BES878 · Barista Touch BES880 · Infuser BES840 · Bambino BES450 / BES500 |
| De'Longhi Dedica / La Specialista | 58 mm | 46 mm | 8 mm | Dedica EC680 / EC685 / EC785 / EC885 · La Specialista EC9115 / EC9155 / EC9255 / EC9335 / EC9455 / EC9665 / EC9865 |
| De'Longhi Classic / Stilosa / ECP | 73 mm | — | — | EC155 / EC155M / EC221 / EC702 / ECO310 · Stilosa EC260BK · ECP3420 / ECP3630 |
| E61 group head | 73 mm | 57 mm | 8 mm | Rocket · ECM · Lelit · Profitec · Sanremo · Quick Mill · Bezzera (standard E61) |
The E61 seal is specified as 73 mm OD × 57 mm ID × 8 mm thick — the same size carried by the single 8 mm gasket listing on this site. The 57 mm inner diameter is what actually centers it on the group head.
Shower screens and puck screens
Screens are specified by their own diameter, which is why a screen for a 54 mm group head measures 53 mm.
| Part | Diameter | Details | Why this number |
|---|---|---|---|
| Breville 54 mm shower screen | 53 mm actual OD | 7 mm center hole | Clearance fit inside a 54 mm group head — this is why it measures 53 mm, not 54 mm. |
| E61 shower screen | 58 mm | Pairs with the 57 × 73 mm gasket | E61 screens are sold by screen diameter (58 mm), while the gasket is sold by ID (57 mm). |
| De'Longhi 51 mm Classic shower screen | 50.5 mm | M4 fixing screw | Smaller than the "51mm" basket it sits above — screen and basket are measured separately. |
| Puck screen for Breville 54 mm baskets | 53 mm | 150 µm etched mesh | Puck screens sit on the coffee bed, so they match the basket ID (53.3 mm), not the 54 mm group head. |
Filter baskets
Baskets are specified by inner diameter — the surface your tamper touches. This is the number that decides whether a 53 mm or a 54 mm tamper is correct.
| Basket | Inner Ø | Notes | What fits it |
|---|---|---|---|
| Breville 54 mm replacement basket | 54 mm nominal | Measured inner diameter ≈ 53.3 mm · single 12 g / double 18–20 g | 53 mm tampers, distributors and puck screens are the correct fit for this basket. |
| De'Longhi 51 mm pressurized basket | 51 mm | Removable silicone ring | Fits Dedica, Stilosa, ECP and Classic EC — not La Specialista. |
Tampers, levelers and distributors
Two diameters matter here: the contact face that presses the coffee, and the outer body that has to clear the basket rim. They are not the same number.
| Part | Contact ⌀ | Outer ⌀ | Note |
|---|---|---|---|
| MHW-3BOMBER YU impact tamper | 53.35 mm | — | Sized for Breville / Sage 54 mm baskets. |
| 53 mm calibrated spring-loaded tamper (P5) | 53 mm | 60 mm | The 60 mm figure is the outer housing, not the contact face — the part that touches coffee is 53 mm. |
| Adjustable distributor / leveler | 53 mm | — | Base diameter 53 mm, overall height 35 mm. |
Dosing rings, funnels and cups
These sit on top of the basket rather than inside it, so their outer diameter is always larger than the group head size they are sold for.
| Part | Dimensions | Note |
|---|---|---|
| 54 mm magnetic dosing ring | Top OD 80 mm · height 20 mm | Basket side is cut for a 53 mm basket ID. |
| 51 mm magnetic dosing ring | Top OD 78 mm · height 20 mm | Fits standard 51 mm 2-ear and 3-ear portafilters. |
| La Specialista hands-free funnel | Top 67 mm · bottom 57 mm · height 30 mm | Auto-grind tabs engage the built-in grinder. |
| 54 mm stainless dosing cup | Top OD 69 mm · height 69 mm · 160 ml | Holds about 30 g of ground coffee. |
| De'Longhi 51 mm aluminum dosing cup | Top 50 mm · height 70 mm · 128 g | Side tabs hang on the Specialista grind station. |
How we measure
- Digital caliper, measured across the widest point for every outer diameter.
- Inner diameters are measured across the opening, at the surface the portafilter rim contacts.
- Silicone compresses — allow 1–2 mm between batches. Stainless parts are within about 0.2 mm.
- Group head designations (51 / 54 / 58 mm) are never used as a substitute for a measured value.
Shop by measured size
Common questions
Is a "54mm" espresso machine the same as a 54mm basket?
No. On Breville and Sage machines, "54mm" describes the group head. The filter basket that sits in it measures about 53.3 mm across the inside, which is why 53 mm tampers, 53 mm distributors and 53 mm puck screens are the parts that fit snugly. A true 54 mm tamper will bind or leave a ring of untamped coffee.
What size is the group head gasket on a Breville 54mm machine?
65 mm outer diameter, 48 mm inner diameter and 8.5 mm thick. The 54 mm figure never appears in those numbers — it is the group head size, not the seal size.
Why does a 54mm shower screen measure 53 mm?
Because the screen has to drop into the group head with a small clearance so it seats flat and can be removed without prying. The screen is measured across its own outer edge (53 mm); the group head it fits is 54 mm.
Are all De'Longhi 51mm group head gaskets the same?
No. There are two seals behind the "51mm" label: 58 mm OD / 46 mm ID / 8 mm thick for Dedica and La Specialista, and 73 mm OD for Stilosa, ECP and the Classic EC series. The 51mm number refers to the basket inner diameter, not to the seal.
How were these dimensions measured?
With a digital caliper on the parts we stock, measured across the widest point for outer diameters and across the opening for inner diameters. Soft silicone compresses, so allow 1–2 mm of variation between batches; hard parts such as stainless screens and baskets are within 0.2 mm.
My part is not in this chart. What then?
Measure the part you are replacing and compare it to the table, then check the product page for that item. If two numbers are close — for example 53 mm against 54 mm — the smaller one is usually the part that sits inside the basket.
PartFixLab is an independent supplier of aftermarket replacement parts. Brand and model names are used only to indicate compatibility. We are not affiliated with, or endorsed by, any machine manufacturer. All dimensions are measured on the parts we ship.