Does the Breville steam wand tip fit a Bambino or Barista Touch?
No. This tip fits the plain threaded steam wands on the Breville 8 Series — Barista Express, Barista Express Impress and Barista Pro — plus Infuser and Duo-Temp Pro. It is not listed for the Bambino or Barista Touch families, which use a different wand fitting. Sharing a 54mm group head does not mean sharing a steam wand.
The mix-up: 54mm is the platform, not the wand
Breville machines are usually described by group head size — 54mm for the Barista and Bambino families, 58mm for the Dual Boiler and Oracle. That number describes the portafilter and basket platform. The steam wand is a separate assembly, and its fitting is not tied to the platform: two machines can both be 54mm and still take different tips. Assuming otherwise is the most common reason a replacement tip gets returned.
Machines that take this tip
| Series | Model code | Fitment |
|---|---|---|
| Barista Express | BES870 / BES870XL | fits |
| Barista Express Impress | BES876 | fits |
| Barista Pro | BES878 | fits |
| Infuser | BES840 / BES840XL | fits |
| Duo-Temp Pro | BES810 / BES810BSS / BES810XL | fits |
Our compatibility list also covers the 820, 848 and 875 model references. All of these machines end in a plain threaded socket — nothing sits behind the tip.
Machines that do not
| Series | Model code | Why |
|---|---|---|
| Bambino | BES450 | Not confirmed for this wand — ask us before ordering. |
| Bambino Plus | BES500 / BEP501 | Auto-frothing wand with a temperature probe close to the tip seat. |
| Barista Touch | BES880 | Auto-frothing wand with a temperature probe close to the tip seat. |
| Barista Touch Impress | BES881 | Auto-frothing wand with a temperature probe close to the tip seat. |
On the three auto-frothing models the thread matches, but a 5 mm threaded section can reach the temperature probe before the tip seats fully. If it stops short, do not force it — a tip that will not screw down flush will leak, and forcing it can damage the probe.
3-hole vs 4-hole: same thread, different behavior
For the machines listed above, both versions screw onto the same wand, so the choice is about technique rather than fitment.
| Option | Steam pattern | Best for |
|---|---|---|
| 3-hole | Vortex angled at nine o'clock | Slower, more controllable stretching; learning latte art |
| 4-hole | Steam spread across four 1.0 mm holes | Faster frothing — roughly 30% less time on back-to-back pitchers |
Measured specifications
| Material | Food-grade 304 stainless steel |
|---|---|
| Height | 23 mm |
| Body diameter | 12 mm |
| Thread | 8.3 mm male (M8.5 × 0.5), 5 mm thread length |
| Single hole | 1.0 mm |
| Options | 3-hole or 4-hole |
How to check your own machine
- Unscrew the tip you already have — on the wands above it comes off by hand or with a cloth for grip.
- Measure across the thread: about 8 mm means the M8.5 family this tip is machined for.
- Measure the threaded length: about 5 mm matches this tip.
- Look inside the wand. A plain socket means you are on the right family. A visible sensor or probe means you are not — ask us before ordering.
Shop by compatible part
Common questions
Will this steam wand tip fit a Breville Bambino or Bambino Plus?
No. It is not listed for the Bambino (BES450) or Bambino Plus (BES500 / BEP501). The Bambino Plus uses an auto-frothing wand with a temperature probe close to the tip seat, so a 5 mm threaded section can reach the probe before the tip seats fully. We have not confirmed a fit for the base-model Bambino either.
Will it fit a Barista Touch or Barista Touch Impress?
No. Both BES880 and BES881 use an auto-frothing wand with a temperature probe close to the tip seat. The thread matches, but the tip can bottom out on the probe instead of seating flush.
Which Breville machines does it fit?
Barista Express (BES870 / BES870XL), Barista Express Impress (BES876), Barista Pro (BES878), Infuser (BES840 / BES840XL) and Duo-Temp Pro (BES810 / BES810BSS / BES810XL), plus the 820, 848 and 875 model references. These all use a plain threaded socket at the end of the wand.
Does "54mm" tell you anything about the steam wand tip?
No. 54mm is the portafilter and basket platform size. The steam wand is a separate assembly and its fitting varies within the same platform — which is exactly why a Barista Express and a Bambino, both 54mm, do not take the same tip.
What is the difference between the 3-hole and 4-hole tips?
Both screw onto the same wand. The 3-hole tip sends steam out in a vortex pattern at the nine o'clock position, which gives slower and more controllable stretching — easier for beginners and for practicing latte art. The 4-hole tip spreads the steam across more holes, which shortens frothing time by roughly a third when you are making several pitchers in a row.
How do I check my machine before ordering?
Unscrew the tip you already have. If the thread measures about 8 mm across and the threaded section is about 5 mm long, and there is nothing but a plain socket behind it, this tip is the right family. If you can see a sensor or a probe inside the wand, do not force a replacement tip on.
PartFixLab is an independent supplier of aftermarket replacement parts. Brand and model names are used only to indicate compatibility. We are not affiliated with, or endorsed by, Breville or Sage. All dimensions are measured on the parts we ship.